|
|
 |
Adolf's Cope and Drag Inserts Style "A"
|
Adolf's style "A" cope and drag inserts provide a quick and simple method to ensure accurate alignment of mold halves. This style consists of two parts, one drag and one cope half. They may be installed on matchboards one above the other, or separated on cope and drag plates or molding boxes. Constructed from ABS plastic, they are available in diameters from 1-1/2" to 3-1/2".
| # |
1.5A |
2A |
2.5A |
2.5AA |
3.5A |
| dia. |
1.5
|
2
|
2.5
|
2.5
|
3.5
|
| A |
0.5
|
0.75
|
1.25
|
1.25
|
1.25
|
| B |
0.5
|
0.625
|
1
|
0.625
|
1
|
| C |
0.437
|
0.531
|
0.906
|
0.531
|
0.906
|
| D |
0.375
|
0.5
|
0.5
|
0.5
|
0.5
|
|
|
Request For Quote & Ordering Information
Catalog
Number |
Description |
UM |
Net
Wt. |
Mfg.
No. |
Ship
Note |
Click Here to View Closeout Specials
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.
HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping
FRT = must be sent by freight carrier due to size, weight, or hazardous classification
T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius
Net Wt. = Net Weight (shipping weight may be more)
|
|
|
|
