FMSC - Aluminum-Filled Room Temperature Resins

Back to: Home >> Liquid Tooling Materials >> Epoxy Casting Resins

Aluminum-Filled Room Temperature Resins
Aluminum-filled epoxy casting resins (gray in color) are not as heavy as iron-filled systems and are more readily machinable.

Epoxy casting resins generate heat (exotherm) during the curing process. This heat can become excessive if the epoxy is poured thicker than the suggested casting thickness, causing warping, cracking and/or brittleness. Therefore, be careful to choose the correct system to pour your part.

Want the details? View the
Specification Table

Freeman 801 Aluminum- Filled Epoxy Casting Resin
Castable to 3" Thickness / 150 Min. Gel Time / 86D Shore Hardness

Freeman 805 Aluminum-Filled Epoxy Casting Resin
Castable to 1/2" Thickness / 150 Min. Gel Time / 88D Shore Hardness

RenCast 200 Low Shrinkage, Aluminum-Filled Epoxy Casting Resin
Castable up to 2" Thick / 90 Min Gel Time / 88D Shore Hardness

RenCast 3262 Aluminum-Filled Epoxy Surface Casting System
Castable up to 1/2" Thick / 45 Min Gel Time / 86D Shore Hardness

RenCast 3269 Aluminum-Filled Epoxy Casting System
Castable up to 3/4" Thick / 150 Min Gel Time / 87D Shore Hardness

RenCast 3269-1 Aluminum-Filled Epoxy Casting System
Castable up to 4" Thick / 150 Min Gel Time / 87D Shore Hardness

RenCast 8269 Aluminum-Filled Epoxy Casting Resin
Castable from 3" - 6" Thick / 90 or 180 Min Gel Time / 88 D or 85 D Shore Hardness

You may also be interested in:

Tooling Plastics Fillers