|
|
 |
Mandrels for Cartridge Rolls
|
This steel adaptor is used to secure and hold both tapered and parallel sided cartridge rolls to air grinders or electric drills. This holder is used by sliding the cartridge roll onto the mandrel pilot until the bottom of the abrasive touches the threaded steel area. Simply screw the cartridge roll onto the threads to secure.
Because of the variety of diameters and lengths of the cartridge rolls, use the chart below to select the proper mandrel.
Your mandrel should be at least 1/4" shorter than your cartridge roll. For proper diameter sizing, reference the table below:
Cartridge Roll Base
Diameter | Use Mandrel with Pilot
Diameter | | 1/8" | 5/64" | | 3/16' | 3/32" | | 1/4", 5/16", 3/8", 1/2" | 1/8" | | 5/8", | 3/16" | | 3/4", 1" | 3/16" or 1/4" |
|
|
Request For Quote & Ordering Information
Catalog
Number |
Description |
UM |
Dia |
L |
Ship
Note |
Click Here to View Closeout Specials
S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.
HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping
FRT = must be sent by freight carrier due to size, weight, or hazardous classification
T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius
Net Wt. = Net Weight (shipping weight may be more)
|
|
|
|
