FMSC - Overnight Cure Flexible Urethane Elastomers

Back to: Home >> Liquid Tooling Materials >> Polyurethane Elastomers

Overnight Cure Flexible Urethane Elastomers
Urethane rubbers are generally less expensive than silicone rubber and more abrasion resistant, making it a preferred material for concrete and architectural castings. However, flexible urethanes are not self-releasing and therefore require a more thorough procedure (wax and PVA) to facilitate clean and easy part release.

Want the details? View the
Specification Table

Freeman 1035 Mold Making Polyurethane Elastomer

Flexible mold making casting resin that is castable to 2" thickness / 30 Min. Gel Time / 40A Shore Hardness

Freeman 1035T Brushable Mold Making Polyurethane Elastomer

Brushable mold making casting resin / 20 Min. Gel Time / 40A Shore Hardness

Freeman 1040 Mold Making Polyurethane Elastomer
Flexible mold making casting resin that is castable to 2” thickness / 28 Min. Gel Time / 45-55A Shore Hardness

RenCast 6400-1 High Elongation Flexible Polyurethane
52A Shore Hardness Casting Resin / 1,300 cps / 30 Min Gel Time

RenCast 6401-1 Tough, Resilient Mold Making Polyurethane
65A Shore Hardness Casting Resin / 1,000 cps / 20 Min Gel Time

RenCast 6410-1 Very Flexible Mold Making Polyurethane
37A Shore Hardness Casting Resin / 1,200 cps / 30 Min Gel Time

RenCast 6418-1 Flexible Urethane Surface Coat System
30-35A Shore Hardness Casting Resin / 8,500 cps / 14-18 Min Gel Time

RenCast 6434 Flexible, Variable Hardness Mold Making Polyurethane
8-40A Shore Hardness Casting Resin / 500 cps / 17 Min Gel Time

Pathway Por-A-Mold S111
2,000 cps / 20 Min Gel Time / 20A±2 Shore Hardness

Pathway Por-A-Mold S333
1,500 cps / 20 Min Gel Time / 35A±2 Shore Hardness

Pathway Por-A-Mold S333TA
Brushable Consistency / 20 Min. Gel Time / 35A +/-2 Shore Hardness

Pathway Por-A-Mold S555
7,500 cps / 15-20 Min. Gel Time / 50A +/- 2 Shore Hardness

Pathway Por-A-Mold S555TA
Brushable Consistency / 15-20 Min. Gel Time / 55A+/-2 Shore Hardness

Pathway Por-A-Mold SX50-1
2,200 cps / 20 Min. Gel Time / 50A +/- 2 Shore Hardness

Pathway Por-A-Mold 2070
2650 cps / 15 Min Gel Time / 70A±2 Shore Hardness