FMSC - RenCast 140 Water Clear Epoxy Casting System

Back to: Home >> Liquid Tooling Materials >> Epoxy Casting Resins >> Unfilled Epoxy Casting Resins

RenCast 140 Water Clear Epoxy Casting System


	Castable up to 3/4" Thick \| 40 Min Gel Time 80 D Shore Hardness

RenCast 140 is a water clear, two component epoxy casting system specifically designed for making clear parts or molds.

NOTE: To obtain full hardness a post of 150°F following a 24 room temperature cure is required. Parts of 1/8" or thinner definitely require this post cure or should be poured and cured at 100-150°F instead of a 24 hour room temperature cure.

		View the specification table
		View the technical datasheet
		View the MSDS
		Video: Preparing Liquid Tooling Materials

		Mixing Cups, Gloves, and Paddles
		Mold Releases
		Tooling Plastics Fillers

Request For Quote & Ordering Information

Catalog Number	Description	UM	Net Wt.	Ship Note
056001	RenCast 140 Gallon Unit (R/H)	EA	9.3	HAZ-G
056005	RenCast 140 Resin 5 Gallon	EA	45	HAZ-G
056006	Ren 140 Hardener 2 Gallons	EA	11.26

Click Here to View Closeout Specials

S&H - Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.

SO = Special Order, Minimum Quantities and Extended Lead Times May Apply.

HAZ-G = Hazardous material, cannot ship air, $20 surcharge applied for each package shipped ground
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping
FRT = must be sent by freight carrier due to size, weight, or hazardous classification

T = Thickness L = Length W = Width H = Height Dia = Diameter Rad = Radius
Net Wt. = Net Weight (shipping weight may be more)