FMSC - Rhodia Addition Cure Silicone Rubber

Back to: Home >> Liquid Tooling Materials >> Mold Making Silicone Rubber

Rhodia Addition Cure Silicone Rubber
These platinum-catalyzed, addition cure silicones offer the following:

1. Unlimited shelf life (in cured state)
2. Very low shrinkage - for increased mold
accuracy
3. Higher durometers - for greater mold stability
4. Excellent heat resistance - up to 400°F intermittently
5. A platinum based catalyst that makes it ideal for polyurethane casting because this material, when cured, won't inhibit the curing of the urethane

Want the details? View the
Specification Table

V-240 Mold Making Silicone Rubber
60A Shore Hardness / 100,000 cps Viscosity / 74 ppi Tear Strength

V-243 Mold Making Silicone Rubber (Heat Cure)
60A Shore Hardness / 100,000 cps viscosity

V-249 Mold Making Silicone Rubber (Heat Cure)
67A Shore Hardness / 100,000 cps Viscosity

V-330 Mold Making Silicone Rubber (Low Viscosity)

25A or 33A Shore Hardness / 10,000 cps Viscosity / 180 ppi (25A) or 170 ppi (33A) Tear Strength

V-340 Mold Making Silicone Rubber (Low Viscosity)

40A, 47A or 53A Shore Hardness / 25,000 cps Viscosity /180 ppi (40A), 150 ppi (47A) or 75 ppi (53A) Tear Strength

V-3040 Clear Mold Making Silicone Rubber

39A Shore Hardness / 40,000 cps Viscosity / High 135 ppi Tear Strength

RTV 3460 Mold Making Silicone Rubber

60A Shore Hardness / 85,000 cps Viscosity / 140 ppi Tear Strength

Silbione RTV 4410 Special Effects Silicone

10A Shore Hardness / 2,500 cps Viscosity

Silbione RTV 4528 Mold Making Silicone Rubber

28 OO Shore Hardness / 3,600 cps Viscosity

You may also be interested in:

Silicone Rubber Accessories

Silicone Rubber V-340 Sample Kit - Addition Cure

Mixing Cups, Gloves, and Paddles