FMSC - Specialty Tooling Pastes & Resin Systems

Back to: Home >> Liquid Tooling Materials

Specialty Tooling Pastes & Resin Systems
These epoxy repair materials and paste compounds by Freeman and Huntsman Advanced Materials represent a wide range of specialty tooling materials for unique tool construction, repair, and alteration. Many of these materials are also often used as an alternative to fiberglass cloth reinforcement behind surface coats.

Want the details? View the
Specification Table

Freeman 1010 High-Density Epoxy Molding Compound
Castable 1/2" Thickness / 60 Min. Gel Time / 77 D Shore Hardness

Freeman 1020 Low-Density Epoxy Molding Compound
Castable 1/2" Thickness / 40/60 Min. Gel Time / 55D Shore Hardness

Freeman 1030 Polyurethane Reinforcement Paste

Trowelable consistency / 9 Min. Gel Time / 70D Shore Hardness

RenLam 569 Laminating Pastes (Blue)
Paste / 35 or 50 Min Gel Time / 80D Shore Hardness

RenPaste 1220 Sag-Resistant Epoxy Paste (Green)
Paste / 33 Min Gel Time / 81D Shore Hardness

RenPaste 1225 Finish Splining Material (White)
Paste / 15 Min Gel Time / 88D Shore Hardness

RenPaste 1250 Aluminum-Filled Repair Paste (Gray)
Paste / 28 Min Gel Time / 87D Shore Hardness

RenPaste 1257-3 Non-Metallic Filled Fairing Compound
Paste / 30 Min. Gel Time

RenPaste 3281 Low Density Epoxy Filler System (Blue)
Castable up to 8" Thickness / 150 Min. Gel Time / 50D Shore Hardness

RenLam 8169 Glass Reinforced Laminating Paste (Blue)
Paste / 50 min. gel time / 74D shore hardness

RenPaste 8281 Low Density Epoxy Filler System (Blue)
Castable up to 8" Thickness / 150 Min. Gel Time / 50D Shore Hardness

RenPaste 177-62 Low Density Tooling Paste

Paste / 65 Min Gel Time / 55D Shore Hardness

Devcon Epoxy Plastic Aluminum - Liquid (Gray)
70 Min. Gel Time / 16 Hour Cure Time

Devcon Epoxy Plastic Steel - Liquid (Dark Gray)
45 Min. Gel Time / 16 Hour Cure Time

Pathway Por-A-Foam
370 cps / 2 Min Gel Time / 4-5 lb/cu ft Density